EBARA Open Impeller Centrifugal Pump (DWO) adalah pompa sentrifugal dengan impeller terbuka berbahan stainless steel AISI 304 yang dirancang untuk menangani cairan bersih maupun cairan dengan partikel halus. Dengan desain impeller terbuka, pompa ini memberikan kinerja andal, perawatan mudah, serta ketahanan terhadap korosi. Cocok digunakan untuk aplikasi industri makanan, minuman, kimia ringan, hingga sistem distribusi air bersih.

Temukan berbagai tipe dan spesifikasi di katalog resmi Pompa Ebara.

Open impeller centrifugal electric pumps with hydraulic parts in AISI 304 stainless steel
Strong construction
Small dimensions
Silent

Washing vegetables, meat, fish, mollusk
Industrial washing plants at cycle end
Washing and surface finishing of metal pieces, boxes, washing bottles, vases, glass containers, crates, baskets
Dishwashers, glasswashers, cup washers for communities
Painting booths
Moving, evacuation, transfer of liquids

PUMP
Liquid Handled	Clean water
Temperature	Min. -5°C ~ Max. +90°C Max. +110°C (H-HS-HW-HSW)
Maximum Working Pressure	0.8 MPa
Impeller	Open centrifugal type
Shaft Seal Type	Mechanical seal
Bearing	Sealed ball bearing
Pipe Connection	Suction: G 2 Discharge: G 2½ (DWO 300–400)
Material	Casing: AISI 304 Impeller: AISI 304 Casing Cover: AISI 304 Shaft Seal: Ceramic/Carbon/NBR (see page 301) Shaft: AISI 304 (Wet extension) Bracket: Aluminium
Applicable Standard of Test	ISO 9906 – Annex A

MOTOR
Type	Electric – TEFC
Efficiency Level (Reg. 640/2009)	Single phase: – Three phase: IE2 (1.1 – 3.0 kW), IE3 (1.1 – 3.0 kW)
No. of Poles	2
Rotation Speed	≈ 2800 min⁻¹
Insulation Class	Class F
Protection Degree	IP55 (CEI EN 60034-5)
Power Rating	1.1 – 3 kW (1.5 – 4 HP)
Frequency	50 Hz
Voltage	Single phase: 230V ±10% Three phase: 230/400V ±10%
Capacitor	Built-in (single phase)
Overload Protection	Single phase: Built-in Three phase: Provided by user
Casing Material	Aluminium
Base Material / Motor Support	Aluminium
Dimensions of Cable Entry	PG11 – PG13.5 – M20x1.5