EBARA In-Line Centrifugal Pump AISI 304 adalah pompa sentrifugal in-line dengan material utama stainless steel AISI 304.
Dirancang untuk sirkulasi dan distribusi air bersih, air pendingin, maupun cairan non-korosif, pompa ini memberikan efisiensi tinggi, perawatan mudah, serta daya tahan terhadap korosi. Dengan desain in-line, instalasi menjadi lebih ringkas dan cocok untuk sistem perpipaan industri, gedung, maupun fasilitas umum.

Temukan berbagai tipe dan spesifikasi di katalog resmi Pompa Ebara.

In line centrifugal electric pumps with hydraulic parts in AISI 304 stainless steel
Versatile
Silent
Reliable

Civil/industrial heating plants
Systems for moving domestic hot water
Cooling and air conditioning plants
Moving low pressure liquids in general

PUMP
Liquid Handled	Clean water
Temperature	Min. -10°C ~ Max. +100°C
Max Environment Temp.	40°C
Min. Suction Pressure	-0.6 MPa at 35°C
Max. Positive Suction Pressure	0.2 MPa (single phase) 0.2 MPa (three phase LPS 25) 0.4 MPa (three phase LPS 32, 40, 50)
Impeller	Closed centrifugal
Shaft Seal Type	Mechanical seal
Bearing	Sealed ball bearing
Pipe Connection	Suction/Flange: DN 25 – DN 50 Discharge/Flange: DN 25 – DN 50
Material	Casing: AISI 304 Impeller: AISI 304 Casing Cover: AISI 304 Shaft Seal: Ceramic/Carbon/NBRH Shaft: AISI 303 (wet extension)
Applicable Standard	ISO 9906 – Annex A

MOTOR
Type	Electric – TEFC
Efficiency Level (Reg. 640/2009)	Single phase: 0.08 – 0.4 kW Three phase: IE2 (0.75 – 1.5 kW), IE3 (0.75 – 1.5 kW)
No. of Poles	2
Rotation Speed	~2800 min⁻¹
Insulation Class	Class F
Protection Degree	IP55 (CEI EN 60034-5)
Power Rating	0.08 – 1.5 kW (0.1 – 2 HP)
Frequency	50 Hz
Voltage	Single phase: 230V ±10% Three phase: 230/400V ±10%
Capacitor	Built-in
Overload Protection	Single phase: Built-in Three phase: User to provide
Motor Bracket	Aluminium
Dimensions of Cable Entry	PG11 – PG13.5 – M16x1.5 – M20x1.5