EBARA Gear Pump Model GP (GPE & GPF) adalah pompa roda gigi (gear pump) yang dirancang untuk menangani oli berat, minyak turbin, dan cairan kental dengan viskositas tinggi. Dengan konstruksi sederhana, pompa ini mampu memberikan tekanan konstan dan aliran stabil. Seri GPE menggunakan gland packing, sedangkan seri GPF dilengkapi mechanical seal untuk kebutuhan aplikasi yang lebih demanding.

Temukan berbagai tipe dan spesifikasi di katalog resmi Pompa Ebara.

Dirancang untuk cairan kental (hingga 500 cSt).
Tekanan discharge hingga 10 kgf/cm² (142 PSI).
Pilihan seal: Gland packing (GPE) atau Mechanical seal (GPF).
Konstruksi material kokoh: FC200 cast iron & S45C steel.
Desain screw-in connection memudahkan pemasangan.

Supply oil for machinery
Fuel transfer
Low pressure transmission
Oil burner injection

MODEL	GPE	GPF
Liquid	Quality: B.C., heavy oil, turbine oil, etc Temperature: 0 ~ 70°C Viscosity: 7 ~ 500 centistoke	Quality: Heavy oil, turbine oil, etc Temperature: 5 ~ 80°C Viscosity: 5 ~ 500 centistoke
Suction & Discharge Size	12 to 25 mm (½” to 1 inch)	12 to 40 mm (½” to 1½ inches)
Discharge Pressure	3 kgf/cm² (43 PSI) = 290 kPa	3 to 10 kgf/cm² (43 to 142 PSI) = 290 to 980 kPa
Allowable Suction Pressure	0.3 to +1.0 kgf/cm² (–0.3 to +1.4 PSI) (–29 to +98 kPa)	0.5 to +1.0 kgf/cm² (–0.5 to +1.4 PSI) (–49 to +98 kPa)
Temperature Limit	70°C (158°F)	80°C (176°F)
Viscosity Range	7 to 500 cSt (7 to 500 mm²/s)	5 to 500 cSt (5 to 500 mm²/s)
Construction	Shaft Seal: Gland packing Bearing: Needle puller bearing	Shaft Seal: Mechanical seal Bearing: Needle puller bearing
Connection	Screw-in	Screw-in
Material (JIS)	Casing: FC200 Gear: S45C Shaft: S45C	Casing: FC200 Gear: S45C Shaft: S45C